- Industria: Aviation
- Number of terms: 16387
- Number of blossaries: 0
- Company Profile:
Aviation Supplies & Academics, Inc. (ASA) develops and markets aviation supplies, software, and books for pilots, flight instructors, flight engineers, airline professionals, air traffic controllers, flight attendants, aviation technicians and enthusiasts. Established in 1947, ASA also provides ...
A round wooden peg used to fasten pieces of wood together without the use of metal fasteners. Holes are drilled into each of the pieces to be joined, and a short dowel is pressed into the holes to hold the pieces together.
Industry:Aviation
A rounded end on a turbine blade that mates with a rounded hole in the periphery of the turbine disk, or wheel. Bulb-root blades are loose when the wheel is cold to allow for different rates of expansion between the blades and the wheel, while holding the blade against the centrifugal loads. Other types of blade roots are the dovetail and the fir-tree.
Industry:Aviation
A round-headed bolt with a square section of the shank just below the head. A carriage bolt is used to hold pieces of wood together. The square section of the shank embeds itself in the wood and keeps the bolt from turning when the nut is tightened on the threads.
Industry:Aviation
A route depicted on instrument approach procedure charts to designate routes for aircraft to proceed from the en route structure to the initial approach fix (IAF).
Industry:Aviation
A route designated to serve flight operations from 18,000 feet MSL, up to and including flight level 450. The routes are referred to as “J” routes, with numbers to identify the designated route.
Industry:Aviation
A route established in international airspace and charted or described in flight information publications such as Route Charts, DOD En Route Charts, Chart Supplements, NOTAMs, and Track Messages.
Industry:Aviation
A rubber or plastic ring used to cover the edges of a hole in thin sheet metal. When wires or tubes pass through a hole in a piece of thin sheet metal, the edges of the hole should be protected with a grommet so the sharp metal cannot damage them.
Industry:Aviation
A rubber scraper blade mounted on a handle in such a way that the blade forms a T with the handle. Squeegees are used to move a liquid over a surface. Some of the common uses for squeegees are removing water from a window after the window has been washed, spreading paint through the open fibers in a silk screen, and removing water from a photographic print after it has been washed.
Industry:Aviation
A rubbery sealant used to line the inside of built-up metal fuel tanks. The sloshing compound is poured into the tank until the tank is about half full. The filler cap is installed and the tank rotated until the compound covers all of the internal surface. Then the compound is drained from the tank. The compound that sticks to the walls of the tank cures to form a tight seal over all of the seams in the tank.
Industry:Aviation
A rubbing seal in a gas turbine engine between a rotating shaft and a fixed housing. The seal, made of carbon, rides on a highly polished steel surface, and the close fit between the carbon and the steel keeps oil from flowing into the gas path of the engine.
Industry:Aviation
