- Industria: Metals
- Number of terms: 8616
- Number of blossaries: 0
- Company Profile:
Michelle Applebaum Research is a Chicago-based equity
research consulting firm founded by Michelle Applebaum,
formerly a Managing Director of Salomon Brothers. The
company provides consulting expertise in the area of steel
and steel equities to institutional investors and industry.
A facility that presses a steel blank into the desired form of a car door or hood, for example, with a powerful die (pattern). The steel used must be ductile (malleable) enough to bend into shape without breaking.
Industry:Metals
Using hydraulic roll force systems, steelmakers have the ability to control precisely their steel sheet’s gauge (thickness) while it is traveling at more than 50 miles per hour through the cold mill. Using feedback or feed-forward systems, a computer’s gap sensor adjusts the distance between the reduction rolls of the mill 50–60 times per second. These adjustments prevent the processing of any off-gauge steel sheet.
Industry:Metals
An air pollutant control device used to trap particles by filtering gas streams through large cloth or fiberglass bags.
Industry:Metals
A cold-rolled, low-carbon sheet steel used for automotive body panel applications. Because of special processing, the steel has good stamping and strength characteristics, and, after paint is baked on, improved dent resistance.
Industry:Metals
A pear-shaped furnace, lined with refractory bricks, that refines molten iron from the blast furnace and scrap into steel. Up to 30% of the charge into the BOF can be scrap, with hot metal accounting for the rest.
Industry:Metals
Long steel products that are rolled from billets. Merchant bar and reinforcing bar (rebar) are two common categories of bars, where merchants include rounds, flats, angles, squares, and channels that are used by fabricators to manufacture a wide variety of products such as furniture, stair railings, and farm equipment. Rebar is used to strengthen concrete in highways, bridges, and buildings.
Industry:Metals
A semi-finished steel form that is used for “long” products: bars, channels or other structural shapes. A billet is different from a slab because of its outer dimensions; billets are normally two to seven inches square, while slabs are 30 inches to 80 inches wide and two inches to ten inches thick. Both shapes are generally continually cast, but they may differ greatly in their chemistry.
Industry:Metals
Cold-reduced sheet steel, 12 inches to 32 inches wide, that serves as the substrate (raw material) to be coated in the tin mill.
Industry:Metals
