- Industria: Metals
- Number of terms: 8616
- Number of blossaries: 0
- Company Profile:
Michelle Applebaum Research is a Chicago-based equity
research consulting firm founded by Michelle Applebaum,
formerly a Managing Director of Salomon Brothers. The
company provides consulting expertise in the area of steel
and steel equities to institutional investors and industry.
A towering cylinder lined with heat-resistant (refractory) bricks, used by integrated steel mills to smelt iron from iron ore. Its name comes from the “blast” of hot air and gases forced up through the iron ore, coke, and limestone that load the furnace.
Industry:Metals
An early step in preparing flat-rolled steel for use by an end user. A blank is a section of sheet that has the same outer dimensions as a specified part (such as a car door or hood), but that has not yet been stamped. Steel processors may offer blanking for their customers to reduce their labor and transportation costs; excess steel can be trimmed prior to shipment.
Industry:Metals
A semi-finished steel form, with a rectangular cross-section that is more than 8”. This large cast steel shape is broken down in the mill to produce the familiar I-beams, H-beams, and sheet piling. Blooms are also part of the high-quality bar manufacturing process: Reduction of a bloom to a much smaller cross-section can improve the quality of the metal.
Industry:Metals
An accident caused by the failure of the walls of the hearth of the blast furnace, resulting in liquid iron or slag (or both) flowing uncontrolled out of the blast furnace.
Industry:Metals
A “brownfield” contrasts to a “greenfield” (or a facility new from the ground up). A brownfield expansion means adding on to an existing facility.
Industry:Metals
The very subtle ridge on the edge of strip steel left by cutting operations such as slitting, trimming, shearing, or blanking. For example, as a steel processor trims the sides of the sheet steel parallel or cuts a sheet of steel into strips, its edges will bend with the direction of the cut (see Edge Rolling).
Industry:Metals
Scrap consisting of sheet clips and stampings from metal production. This term arose from the practice of collecting the material in bushel baskets through World War II.
Industry:Metals
The standard pipe used in plumbing. Heated skelp is passed continuously through welding rolls, which form the tube and squeeze the hot edges together to make a solid weld.
Industry:Metals
# Camber is the deviation of a side edge from a straight edge. Measurement is taken by placing a straight edge on the concave side of a sheet and measuring the distance between the sheet edge and the straight edge in the center of the arc. Camber is caused by one side being elongated more than the other.
# The hook or dogleg near the ends of a coil.
Industry:Metals
Camber is the deviation from edge straightness. Maximum allowable tolerance of this deviation of a side edge from a straight line are defined in ASTM Standards.
Industry:Metals
