- Industria: Automation
- Number of terms: 8432
- Number of blossaries: 0
- Company Profile:
Rockwell Automation, Inc. provides industrial automation power, control, and information solutions.
A floor-mounted assembly of one or more enclosed vertical sections having a horizontal common power bus and principally containing combination motor control units. These units are mounted one above the other in the vertical sections. The sections normally incorporate vertical buses connected to the common power bus, thus extending the common power supply to the individual units. Power may be supplied to the individual units by bus-bar connections, by stab connection, or by suitable wiring (as defined in NEMA Standard Pub. No. ICS 2, 1988).
Industry:Automation
A drive comprised of the motor, drive controller and operator’s controls (either manual or automatic).
Industry:Automation
An area in the program that alters the operation if a rack fault occurs. Each fault zone is delimited by fence codes.
Industry:Automation
Abbreviation for electromotive force. The force that causes electricity to flow when there is a potential difference between two points. Expressed in units of volts. The voltage applied to a motor armature from a power supply is the emf and the voltage generated by the motor is the counter-emf or cemf.
Industry:Automation
The number of discrete conditions or signal events per second (in baud).
Industry:Automation
The maximum rate at which a control loop can respond to any change in any control parameters. This refers to either the position or velocity command as well as the measured value for either. This is different from the rate at which the control can accept information.
Industry:Automation
1) A solid-state device that includes combinations of circuit elements (resistors, capacitors, transistors) that are fabricated on or within a single continuous substrate (supporting semiconductor for the circuit).2) Contrasted with discrete circuit
Industry:Automation
A dump or list of pertinent variables and data structures gathered over a short time to be considered frozen; nothing changes during the dump.
Industry:Automation
A portion of an on-line operating system that allows the system to respond to a set of on-line commands during a debug operation.
Industry:Automation
